Products Catalog: oil press, wood pellet mill, flour milling machine - Anyang GEMOC Energy Machinery Co., Ltd

Products Catalog: oil press, wood pellet mill, flour milling machine

Origin:

China

Pack. & Delivery:

Wooden case

Specification:

Our Oil Press can press rape seed, peanut, olive, sesame, sunflower, soybean, almond,
palm, etc. We have small scale oil press with capacity from 0.5t/ d to 12t/ d.
We also have large scale Oil Press with capacity from 12t/ d to 50t/ h. We also can process the complete turn-key oil plant from capacity 100-500t/ d.

Wood Pellet MillFeatures:
1) Raw material: pellet fuel is made mainly of sawdust, shavings and fines
leftover after processing trees for lumber and other wood products. At
a pellet mill the material is dried, compressed, and formed into small
eraser-sized bits. They are clean, pleasant smelling and smooth to touch
2) Working principle: adopts gear transition and makes pellets
3) Advantages of wood pellets:
a) Reduces our dependence on oil and gas
b) Pellet fuel cost is not dictated by world events; therefore cost is more
affordable and predictable
c) Since pellet stove emissions are so low they can be burned in most
areas even those with burning restrictions
d) Pellet fuel has been proven to provide the cleanest burn of any
solid fuel
e) Only minimal clearance is needed for appliance installation. Because
of the near total combustion ( around 98.5% ) pellet stoves produce
virtually no creosote. This also allows installation of a pellet stove
by directly venting without a chimney
f) Sustainable source of fuel
g) Reduces waste destined for landfills and the cost of disposing
waste is greatly reduced
h) One ton of wood pellets have the heat value of about one and a
half cords of wood and stacks easily in one third of the space. This
makes it possible to easily store fuel for the entire season
i) Wood pellets are a clean, environmentally friendly, natural and
renewable fuel resource
Main performance figures for process 100MT/ 24h of wheat equipment production lines and Flour Mill :
1: Cleaning part: Adopts the technique of three screening, two scouring, two stone
removing, two damping and three magnetic separating
2: Milling part: 10 sets of FMFQ5 x 2 mill, 3 sets of six-section high-efficiency
plan sieve, 2 sets of purifier consist of the milling technique of 5 break, seven
reduction, 2 coarse, 4 purifier, two bran brusher, and one checking
3: Production capacity: 100 metric tons wheat per 24 hours
4: Power supply: about 370kW
5: Used under:
Voltage: 380V
Frequency: 50Hz
Elevation: below 1, 200m
6: Dimensions of workshop: four-storied building with 30m length and 6.6m width and
overall 18m height
7: Containers: 6 x 40' FCL + 1 x 20' FCL
We can do complete Flour Mill lines as per buyers' requirements.

Request for Quote

Your inquiry will be recorded in "Member Trade Mail".

Recommend to your friends